For most Converse shoes sold in the United States, low-top laces are about 36 inches long, while high-top laces are usually about 45 inches long. The right size can change with the number of eyelets, your lacing style, and whether the shoe is a standard Chuck Taylor, Chuck 70, platform, or kids’ model.
If you still have the old laces, measure them from end to end. That is usually the most accurate way to choose a replacement.

Converse Shoelace Length Chart
Use this chart as a starting point for common Converse styles in the U.S. The measurements are practical replacement ranges, not a guarantee for every model or size.
| Converse shoe style | Typical eyelets per side | Recommended lace length |
|---|---|---|
| Kids’ low-top Converse | 4–5 | 27–36 inches |
| Adult low-top Converse | 5–6 | 36 inches |
| Adult high-top Converse | 7–8 | 45 inches |
| Chuck 70 high-top | 7–8 | 45–54 inches |
| Extra-high or extended high-top | 9 or more | 54–63 inches |
| Platform or thick-soled styles | Varies | Usually 36–54 inches |
The most common choices are:
- 36-inch laces for low-top Converse
- 45-inch laces for standard high-top Converse
- 54-inch laces for high-tops that need more lace for a loose fit, wide feet, or ankle wrapping
The number of eyelets matters more than the shoe name. Two Converse models may both be called high-tops but may use different lace lengths.

How Long Are Converse Low-Top Laces?
Most adult Converse low-top shoes use 36-inch laces. This length usually works for classic low-top Chuck Taylor All Stars and similar shoes with five or six eyelet pairs.
Choose 27-inch laces for some kids’ shoes or very short low-top designs. They may also work for adults who use a tight, simple lacing pattern and do not tie a large bow.
A 36-inch lace is a safer choice when:
- The shoe has six eyelet pairs.
- You want a normal bow with two loops.
- You lace the shoe all the way to the top.
- You have a wider foot and need more slack.
- You prefer a loose or casual fit.
A 27-inch lace may be too short for a full adult low-top. It can leave small lace ends that are hard to tie.

How Long Are Converse High-Top Laces?
Standard adult Converse high-tops usually need 45-inch laces. This length commonly fits shoes with seven or eight eyelet pairs.
Some people prefer 54-inch laces for the same type of shoe. The longer size gives you more room for a loose fit, a larger bow, or a lacing style that crosses around the ankle.
Use 45-inch laces when:
- The shoe has seven or eight eyelet pairs.
- You want to lace through every eyelet.
- You plan to tie the shoe near the top.
- You use standard crisscross lacing.
Use 54-inch laces when:
- Your feet are wide.
- You skip fewer eyelets but want long lace ends.
- You wrap the laces around the ankle.
- You prefer a loose, relaxed look.
- Your current laces measure close to 54 inches.
A 45-inch lace may work well in one high-top but feel short in another. High-top shaft height, eyelet spacing, and foot shape all affect the final result.

What Length Do Chuck 70 Laces Need?
Most Chuck 70 high-tops can use 45-inch laces, but 54-inch laces may be better for a loose fit or decorative lacing. Chuck 70 shoes can feel different from standard Chuck Taylor All Stars because of changes in materials, padding, and fit.
The best method is to count the eyelets and measure the original lace. If the original lace is unavailable, start with this guide:
- Six eyelet pairs: 36 inches
- Seven or eight eyelet pairs: 45 inches
- Eight eyelet pairs with extra lace needed: 54 inches
- Nine or more eyelet pairs: 54–63 inches
Do not assume that a lace marketed as “for Converse” will fit every Converse shoe. Replacement laces may be made for a specific model, size range, or lacing style.

How to Choose the Right Converse Lace Length
Count the eyelets, measure the old lace, and consider how you want the shoe to look. These three checks give a better answer than using the shoe name alone.
1. Count the eyelet pairs
Count the metal or fabric holes on one side of the shoe. Do not add both sides together.
For example, if one side has six holes and the other side has six holes, the shoe has six eyelet pairs. It will usually need about 36-inch laces.
2. Measure the old lace
Remove the lace and lay it flat without stretching it. Measure from the tip of one plastic or metal end to the tip of the other.
Use the same unit when comparing sizes. A lace listed as 45 inches should measure close to 45 inches from end to end.
The old lace may not show the original length if it has shrunk, stretched, or lost its tips. Still, it gives you a useful starting point.
3. Check your lacing style
A standard crisscross pattern uses less lace than some decorative patterns. You may need a longer lace if you:
- Skip eyelets.
- Use ladder lacing.
- Wrap the lace around the ankle.
- Leave the top eyelets open.
- Tie a large bow.
- Wear thick socks.
- Need extra room for a wide foot.
4. Compare the lace ends
Put the shoe on and lace it as you normally would. You should have enough length to tie a secure bow, but not so much that the ends drag on the floor.
As a general guide, each lace end should have enough extra length to form one loop and a short tail. If you cannot make a normal bow, the laces are too short.

A Quick Calculation for Replacement Laces
You can estimate the needed length by comparing the new lace with your old one. If your old lace fits well, replace it with the same length or the next available size.
For example:
- Old lace: 34 inches
- Available replacement sizes: 36 inches and 45 inches
- Best starting choice: 36 inches
If your old lace measures 42 inches:
- A 36-inch lace will likely be too short.
- A 45-inch lace is the closer choice.
- A 54-inch lace may be useful if you want a loose fit or larger bow.
This is a practical estimate, not a formal Converse sizing formula. Shoe construction and lacing style can change the result.

What If Converse Laces Are Too Short?
If your Converse laces are too short, move up to the next common length. For example, replace 36-inch laces with 45-inch laces rather than trying to force the shoe closed.
Signs that the laces are too short include:
- You cannot use the top eyelets.
- The bow has very small loops.
- The knot comes undone easily.
- The lace pulls tightly across the tongue.
- One side has much less lace than the other.
- You cannot leave enough room for your foot.
Do not stretch the laces hard to make them reach. Excess tension can make the shoe uncomfortable and may pull on the eyelets.
You can also skip the top eyelet as a short-term fix. This may help with fit, but it does not solve the length problem if you want to lace the shoe fully.

What If Converse Laces Are Too Long?
If the laces are too long, you can use a different lacing pattern, tuck the ends inside the shoe, or choose a shorter size. Do not let long lace ends hang near the ground, where they can catch under a shoe.
Try these options:
- Use the top eyelets to take up more lace.
- Tie a smaller bow.
- Tuck the knot under the tongue.
- Use a lace-lock style near the top.
- Replace 54-inch laces with 45-inch laces.
- Replace 45-inch laces with 36-inch laces when the shoe allows it.
A shorter lace is usually better than cutting a long lace. Cutting can cause the woven material to fray, and the plastic tips may no longer fit.

Do Different Converse Lacing Styles Need Different Lengths?
Yes. Lacing style can change the amount of lace required. Standard crisscross lacing is a useful baseline, but patterns with more vertical sections, wraps, or decorative loops need extra length.
The following patterns may need longer laces:
- Ladder lacing
- Spiderweb lacing
- Ankle-wrap lacing
- Loose fashion lacing
- Patterns that skip eyelets and create long diagonal runs
If you are switching from standard crisscross lacing to a decorative pattern, move up one size when possible. For example, choose 54 inches instead of 45 inches for a high-top.

Flat or Round Laces: Which Works Better?
Most classic Converse shoes use flat cotton laces. Flat laces sit neatly across the tongue and match the original casual design.
Round laces can work, but they may:
- Look different from the original style.
- Slide more easily through the eyelets.
- Create a smaller or tighter knot.
- Put more pressure on small parts of the eyelets.
The lace length remains the main issue. A 45-inch flat lace and a 45-inch round lace have the same stated length, but they may feel different because of their thickness and ability to hold a knot.
Choose a lace that fits through the eyelets without force. Thick replacement laces may not pass through older or narrow eyelets.

How to Replace Converse Shoe Laces
Replacing Converse laces takes only a few minutes.
- Remove the old laces and keep one nearby for comparison.
- Check the new lace length.
- Start at the bottom eyelets near the toe.
- Pull both ends until they are even.
- Lace upward through each eyelet pair.
- Keep the tension similar on both sides.
- Try the shoe on before tying the final bow.
- Adjust the tension so the shoe feels secure but not tight.
The laces should pass through every intended eyelet without pulling hard. After tying, the bow should stay on the shoe and the ends should not touch the ground.

Common Mistakes When Buying Converse Laces
The most common mistake is choosing a length based only on the word “high-top” or “low-top.” Eyelet count gives a more useful starting point.
Avoid these errors:
- Counting all eyelets on both sides as one total.
- Buying 36-inch laces for a tall high-top.
- Choosing 54-inch laces without considering the extra slack.
- Ignoring a decorative lacing pattern.
- Measuring a stretched lace under tension.
- Assuming every Converse model uses the same lace.
- Choosing a thick lace that does not fit the eyelets.
- Cutting long laces before trying them in the shoe.
When in doubt, buy the closest longer size from a seller that provides exact measurements. It is easier to manage a little extra lace than to fix a lace that cannot reach the top eyelet.
Frequently Asked Questions
Are Converse laces the same length on every shoe?
No. Converse lace length varies by shoe height, eyelet count, shoe size, and lacing style. Low-tops often use 36-inch laces, while high-tops often use 45-inch laces.
Are 45-inch laces long enough for Converse high-tops?
Usually, yes. A 45-inch lace commonly fits standard adult high-tops with seven or eight eyelet pairs. Choose 54 inches if you want more slack, a larger bow, or an ankle-wrap style.
Can I use 36-inch laces on Converse high-tops?
Usually, 36-inch laces are too short for fully laced adult high-tops. They may work only if you skip the upper eyelets or use a loose lacing pattern.
Can I use 45-inch laces on Converse low-tops?
Yes, but they may leave long ends. You can tuck the ends, use more eyelets, or choose 36-inch laces for a cleaner fit.
How do I know if my Converse laces are too long?
If the ends drag, the bow is unusually large, or you have to wrap the laces several times, they may be too long. Try a shorter size or a lacing method that uses more of the lace.
Bottom Line
For most Converse shoes in the United States, start with 36-inch laces for low-tops and 45-inch laces for high-tops. Choose 54-inch laces when you need extra room for wide feet, loose lacing, ankle wraps, or a larger bow.
For the most accurate result, count the eyelets and measure the old lace before ordering. That simple check helps you avoid laces that are too short, too long, or too thick for your Converse shoes.

Rubel Miah is the Senior Editor at MyStyleGrid.com, where he brings a sharp editorial eye and an unshakable love for fashion to everything he does. A true style addict, Rubel lives and breathes trends, from streetwear to high fashion, and has a knack for turning inspiration into impactful stories. With years of experience in fashion journalism and digital media, he curates content that empowers readers to express themselves through style. When he’s not editing features or forecasting the next big thing, you’ll find him hunting down vintage pieces or capturing street style moments around the city.

